Enable Usb Debugging | Usb Debugging Android 7

0

Enable Usb Debugging : In order to set up a connection between the Android device and the computer, you need to have a development toolkit. You will need to connect the phone or any other Android device with the computer system and get your device recognized with this tool. The primary motive of enable USB debugging android from pc is to transfer the files using Android software development kit. Only when the USB debugging is turned on, can the android phone be recognized by the development tools.

Also Read : Replace Kingroot With Supersu

To connect your Android device with pc, use the USB cable. Tap USB option on the notification panel, select MTP mode. Wait until the driver is installed. To find your device, go to my computer/this pc.

USB Debugger for Android 

Enable USB debugging for Android different versions is different. The first step is to go to settings then about phone and check the Android version. Here are some detailed steps for debugging Android versions 4.2 and above:

  • Go to settings then about phone navigate to build number and press build number for seven times.
  • Go back to settings, developer option tap on USB
  • Click on ok to allow debugging

Enable Usb Debugging Android 7

Usb debugging android 7 is a good way to transfer all the important media and documents to your pc. The steps for it are as follows:

  • Navigate to setting and then to the about phone option
  • The “About phone” option will give you the information about the build number.
  • Consecutively tap the build number. “You are now the developer” message will pop up.
  • Turn on the developer option. Click on allow to confirm the process.

This is a simple and quick process to connect the phone and computer. Try this today to make your documents, and other important stuff safe.

How To Enable USB Debugging Mode

As I have once said, by finish this selection is commonly disabled and hidden. Therefore, if you desire to came up to snuff the USB Debugging selection you require to ditto the instructions subject to below. I have given diverge instructions for Android 2.3, 4.0 and 4.2 versions.

Enable USB Debugging In Android 2.3 Or Earlier Version

usb debugging

Enable USB Debugging In Android 4.0 Or Higher Version:

1.Google has slightly changed this option on Android 4.0 version compared to the previous versions.
2.From the main menu, first go to the “Settings” in your android phone.

3.Scrolling down, you will be able to find the Developer options”.
4.Tap that option now and you can see the “USB Debugging” option. Just enable it by taping on it.

Enable USB Debugging Mode In Android 4.2 Or Latest Versions (4.4, 5.0)

Usb debugging

1.In this version, Google has hidden the whole “Developer options” section for the users who are not much familiar to use developing tools.

2. So, to enable it go to “Settings” option.

3.From Settings go to “About” option.

4.From there go the “Build number”. You can find this at the end of the scroll.

5.Just tap that Build Number option repeatedly for 7 times. On the third tap, you will be presented with a message saying you have only 4 more taps to be a developer.

6.Continue to tap until you the message “Hooray, you are now a Developer”. At this phase, go back to the “Settings” page.

7.Now, you will be able to see the “Developer options“.

8.Launch the developer options, then check on “USB Debugging” option. Tap “OK”

Once this option is enabled, at the end of the day as a non-developer you can access this option from one end to the other your allusion and you will merit full choice to approach your android phone. There at the heels of you can no if and or buts about it root or acknowledge your android smartphone by following the rational procedure. Enjoy!

Leave A Reply

Please turn AdBlock off